Search
Search
Cancel
anchor&chain

PRODUCT CENTER

CATEGORIES

All categories
G2140 Alloy Bolt Type Anchor Shackles

G2140 Alloy Bolt Type Anchor Shackles

The Crosby G-2140 Alloy Bolt Type Anchor Shackles meets the performance requirements of federal specification RR-C-271F, Type IVA, Grade B, Class 3, Except for those provisions required by the contractor.   Quenched and tempered Alloy bows and alloy bolts Forged alloy steel is used in capacities ranging from 2,000kg up to 200,000kg, Cast alloy steel is used in capacities ranging from 250,000kg up to 400,000kg, Meets performance requirements of Grade 8 shackles Working load limit is permanently shown on every shackle 30,40,55 and 85 Tonne shackle bows are available galvanised or self-coloured with pins that are galvanised and then painted red 120,150,175 tonne shackle bows are hot dip galvanised: bolts are Dimecoated and painted red 400 Tonne shackle bows are Dimecoated: Bolts are Dimecoated and painted red Sizes 1-1/2 inch and larger are RFID-equipped Approved for use at -40˚C and up to 204˚C  Shackles are quenched and tempered and can meet DNV impact requirements  All sizes are individually proof tested if requested at the time of order Shackles 200 tonne and larger have serialised pin and bow, Material Certification (chemical), magnetic particle inspected Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. 2140 shackles met other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26 Type approval and certification in accordance to ABS 2006 steel vessel rules 1-1-17.7, and ABS guide for certification of cranes. Look for the Red pin... The mark of genuine Crosby quality
G2140 Alloy Bolt Type Anchor Shackles
Crosby Shackles

Crosby Shackles

Crosby® shackles have been an industry leader for quality for more than 50 years. We’re pleased to sell a wide variety of sizes and styles, from simple bolt type Crosby® anchor shackles to SlingSaver® screw pin shackles, and heavy duty Crosby® chain shackles. Shackles from Crosby® offer many design benefits to assure quality, including: The highest design factor in the industry: 6 to 1. Closed die forging for consistent dimensions. Crosby® hardware shackles are fatigue-rated as well as load-rated. All bows and pins are quenched and tempered to enhance performance in cold temps and adverse conditions. The quench and temper process results in a toughness that reduces the risk of failure. Identification and application information is forged on each product for traceability. Each Crosby® shackle (with the exception of 2160, 2169, 252 and 253), has QUIC-CHECK® angle indicators forged into the shackle bow at 45 degree angles from vertical. These allow users of screw pin and bolt type shackles to quickly check the approximate angle of a two-legged hitch, or the angle of a single leg hitch when the shackle pin is secured and the pull of the load is off vertical (side loaded), which results in a reduction of the shackle’s working load limit. For round pin shackles, the 45 degree QUIC-CHECK® indicators can be used to ensure load is applied strictly in-line. If you have questions about any of the Crosby® rigging shackles we sell, give us a call. Our product specialists will be happy to help with product information. They can also help track down a product you need if you don’t see it listed here. Call toll free: .
Crosby Shackles
上一页
1
2
anchor&chain
anchor&chain

Company phone:

+86514-85597449

anchor&chain

Company email:

sales@ligchain.com

anchor&chain

Company address:

No.43 Jiangyang Road,Development Zone, Yangzhou City, Jiangsu Province, China.

Copyright © YANGZHOU LIG MARINE MACHINERY CO.,LTD.     All Rights Reserved.  苏ICP备19007055号-1     Powered by www.300.cn

anchor&chain